7 Tips For Working Safely With A Telehandler

7 Tips For Working Safely With A Telehandler

A hybrid crane forklift and telehandler, the telehandler is also available with additional attachments such as a bucket, muck grab, or winch. You can attach a platform attachment to make it a boom-lift.

Telehandlers can have their extendable boom raised at a 70-degree angle to reach a maximum of 30 feet. A combination of factors determines the maximum weight limit for a telehandler, including its boom extension, angle, attachment type, wind speed, and wind speed.

Telehandlers can lift up to 4,400 to 12,000 lbs depending on how heavy the equipment is. Maximum lift capacity cannot be achieved at maximum reach. Telehandlers should be used with caution.

Telehandlers: Common Uses

Telehandlers are versatile pieces of equipment. Telehandlers are versatile because they can be extended and can use many attachments.

Telehandlers are primarily used to “lift and place” objects. They have a greater extension capability than traditional forklifts.

You can attach pallet forks, buckets, lifting jibs, and sweepers to the telehandler. Telehandlers are able to perform many tasks, such as lifting and moving material, moving earth loads, cleaning worksites, lifting workers up to an elevated height, or even snow removal.

Telehandler accidents are a common occurrence. These accidents can be avoided if you follow the 7 tips.

1. Follow The Right Telehandler Training Course

It is important to complete a telehandler training course. To increase your safety, get to know the machine you will be using. Read the manual thoroughly and be familiar with the safety symbols.

Do you need a training course that is suitable for your needs? If so, you should definitely look at the telehandler training Sydney offer.

2. Always Inspect Your Telehandler Before You Use It

Before you start to work, make sure the machine is in good working order.

3. Pay Attention While Loading Your Telehandler

Be sure to not load more than the maximum weight. A telehandler that is too heavy could tip. Telehandlers come with safety systems that prevent the lifting of heavier loads than permitted. The user manual will tell you how much weight your telehandler can lift.

4. Pay Attention While Driving

Do not get distracted while driving. This is especially important if you are carrying fragile loads or pallets that could slide off the forks. It is recommended that you drive back if you are unable to see more than 2 meters beyond your load.

5. Always Keep Your Forks 30cm Away From The Ground.

When driving a Telehandler, the distance between the ground surface and any attachments or forks must be at least 30 cm. Transporting a load should be done at a height of  30cm above the ground. Be aware of uneven surfaces and adjust the fork height if necessary.

6. Change Your Driving Behaviour

On public roads, telehandlers can travel up to 40 km/h. Construction sites are a different story. Unexpected movements or sudden changes can cause the Telehandler to lose its weight or tilt. Always consider the terrain and the telehandler weight. Always move up and down slopes with control and at a safe speed. You can lose control of your steering wheel and telehandler if you drive on uneven terrain at an exaggerated speed.

7. Always Drive Forwards If You Go To Uphill.

When driving uphill, always drive straight ahead. Never drive uphill diagonally or turn on a slope. The load should be loaded in the most favorable position relative to the slope. To avoid contact with the ground, you will need to raise the fork height and lean backward.

Comments are closed.